@dickson wrote:
Just building a little call center for a client whose users can only log into the queue via the phone (*45).
All agents are dynamic agents, and Id like to be able to have individual passwords for their extensions.
I know i can set a queue password, but wondering if there is something a little more granular?
.
Posts: 1
Participants: 1
@wirelessworlds wrote:
Im new to freepx, and think I missed soemthing in the config , but it looked simple.
I am getting a 401 error
Posts: 3
Participants: 2
@kbocek wrote:
I use the Asterisk info page to check the status of my phones. On the Peers page I see a description field. How do I set this?
Posts: 2
Participants: 2
@fetoa wrote:
Hi! I have an important problem with the queues.
I have configured a queue with many extensions, The ring strategy is rrmemory. When an agent doesn't answer a call (Agent Timeout = 8 sec) the call goes to next extension, but there is about 3 seconds silence between extensions, so no phone is ringing in this time. I can't find the option to configure this time. I'm interested on ringing inmediately when a call jumps to another extension.
Any help please? I don't find any value on the queue configuraton.
Best regards!
Posts: 2
Participants: 1
@fetoa wrote:
Hi,
I'm interested on get ringing phones on a queue when a position announcement is played. Is it possible? I need to be possible to answer a call even when a position announcement is played to the caller.
Thanks!
Posts: 1
Participants: 1
@mgfleming wrote:
I'm seeting up FreePBX with SIP trunking from Twilio. It all works except for periodic failures when calling in to the PBX. When this happens I get a recording "all circuits are busy" and the following error is logged:
[2017-09-26 16:25:31] WARNING[17554][C-0000025f] Ext. s: "Rejecting unknown SIP connection from 217.172.189.87"
I don't know where this IP address is coming from, since it is not listed as one of the IP's from which Twilio originates calls. A reverse DNS lookup shows that it is registered in Germany. I thought there might be some NAT problem and I tried various NAT settings on my router, but these all made things worse. I suppose I could just create another trunk for this IP address, since the errors always references this exact address, but I'd like to understand what's happening --??
Thanks much in advance for your advice.
Matthew Fleming
Posts: 1
Participants: 1
@rofferman wrote:
My Dashboard is showing that i have 424 bad destinations after I upgraded to 14.
I cannot find anywhere where these are duplicatedAny help is greatly appreciated
DEST STATUS: ORPHAN
Inbound Fax Detection: (8124923532/)
DEST STATUS: CUSTOM
Exten: Carol Gardner (3502)
Exten: Carol Gardner (3502)
Exten: Carol Gardner (3502)
Exten: Bria Enloe (3503)
Exten: Bria Enloe (3503)
Exten: Bria Enloe (3503)
Exten: Susan Wolfe (3515)
Exten: Susan Wolfe (3515)
Exten: Susan Wolfe (3515)
Exten: Conf Room (3517)
Exten: Conf Room (3517)
Exten: Conf Room (3517)
Exten: Jeff Wolfe (3522)
Exten: Jeff Wolfe (3522)
Exten: Jeff Wolfe (3522)
Exten: Mark Watkins (3523)
Exten: Mark Watkins (3523)
Exten: Mark Watkins (3523)
Exten: Chad Nisbeth (3525)
Exten: Chad Nisbeth (3525)
Exten: Chad Nisbeth (3525)
Exten: Arbitration (3528)
Exten: Arbitration (3528)
Exten: Arbitration (3528)
Exten: Erik Parsons (3531)
Exten: Erik Parsons (3531)
Exten: Erik Parsons (3531)
Exten: Tina Sale Day (3532)
Exten: Tina Sale Day (3532)
Exten: Tina Sale Day (3532)
Exten: JB (3534)
Exten: JB (3534)
Exten: JB (3534)
Exten: Mike Perry (3535)
Exten: Mike Perry (3535)
Exten: Mike Perry (3535)
Exten: Cynthia (3539)
Exten: Cynthia (3539)
Exten: Cynthia (3539)
Exten: Chad IF Desk (3583)
Exten: Chad IF Desk (3583)
Exten: Chad IF Desk (3583)
Exten: Erika Staton (3500)
Exten: Erika Staton (3500)
Exten: Erika Staton (3500)
Exten: A Lane (3555)
Exten: A Lane (3555)
Exten: A Lane (3555)
Exten: B Lane (3556)
Exten: B Lane (3556)
Exten: B Lane (3556)
Exten: C Lane (3557)
Exten: C Lane (3557)
Exten: C Lane (3557)
Exten: D Lane (3558)
Exten: D Lane (3558)
Exten: D Lane (3558)
Exten: E Lane (3559)
Exten: E Lane (3559)
Exten: E Lane (3559)
Exten: Check In Room (3519)
Exten: Check In Room (3519)
Exten: Check In Room (3519)
Exten: Server Room (3537)
Exten: Server Room (3537)
Exten: Server Room (3537)
Exten: Page (3370)
Exten: Page (3370)
Exten: Page (3370)
Exten: Sara Pillow (3501)
Exten: Sara Pillow (3501)
Exten: Sara Pillow (3501)
Exten: Miranda Kieffer (3505)
Exten: Miranda Kieffer (3505)
Exten: Miranda Kieffer (3505)
Exten: Miranda Moyes (3507)
Exten: Miranda Moyes (3507)
Exten: Miranda Moyes (3507)
Exten: Tina Perry (3508)
Exten: Tina Perry (3508)
Exten: Tina Perry (3508)
Exten: Robbie Offerman (3538)
Exten: Robbie Offerman (3538)
Exten: Robbie Offerman (3538)
Exten: Tony Wolfe (3529)
Exten: Tony Wolfe (3529)
Exten: Tony Wolfe (3529)
Exten: Michelle Hamer (3533)
Exten: Michelle Hamer (3533)
Exten: Michelle Hamer (3533)
Exten: Tech 1 (3510)
Exten: Tech 1 (3510)
Exten: Tech 1 (3510)
Exten: Brandon Kieffer (3511)
Exten: Brandon Kieffer (3511)
Exten: Brandon Kieffer (3511)
Exten: Kyle Frank (3513)
Exten: Kyle Frank (3513)
Exten: Kyle Frank (3513)
Exten: Rhonda Wolfe (3504)
Exten: Rhonda Wolfe (3504)
Exten: Rhonda Wolfe (3504)
Exten: Cynthia Wolfe (3514)
Exten: Cynthia Wolfe (3514)
Exten: Cynthia Wolfe (3514)
Exten: Tony Sr (3516)
Exten: Tony Sr (3516)
Exten: Tony Sr (3516)
Exten: Brandon IF (3520)
Exten: Brandon IF (3520)
Exten: Brandon IF (3520)
Exten: Kitchen (3521)
Exten: Kitchen (3521)
Exten: Kitchen (3521)
Exten: Carol Sale Day (3524)
Exten: Carol Sale Day (3524)
Exten: Carol Sale Day (3524)
Exten: Mechanics (3526)
Exten: Mechanics (3526)
Exten: Mechanics (3526)
Exten: Mark IF Desk (3527)
Exten: Mark IF Desk (3527)
Exten: Mark IF Desk (3527)
Posts: 6
Participants: 3
@karthick wrote:
Need to add Page Group extension, from my application.
To add extension I had used the below command from my TCP server, which is running on the same FreePBX server PC.
fwconsole bi --type='extensions' extensions.csv
Is there any option to add paging or intercom extension like this or any other way?
Posts: 1
Participants: 1
@Chrisb45 wrote:
Does anyone know of a way to be able to connect to the QXact sql. I have spoken to sangoma who have said it cannot be done. The problem I have is that there is a default setting that clears the reports every 90 days this setting is in part of the console that has a big warning above all the settings saying these settings can seriously damage your system or words to that affect so we didn't look any further now we want to run some reports from previous months so wanted to try and extract the data.
Thanks in advance
Posts: 1
Participants: 1
@jfinstrom wrote:
Next week members of the FreePBX and Sangoma team will be at Astricon. Come see us at booth 8 or at one of the talks. Every year we enjoy seeing members of the community that we typically only interact with through a computer screen. If you are going to be there come say hello.
Posts: 1
Participants: 1
@vespino wrote:
Since I upgraded to FreePBX 14 (from RasPBX 13) and when I make a call the outgoing CID is shown in the display of my Yealink Phone. That's a great feature because it confirms I'm using the correct number when calling. So far, ok. But the log file also show CID: XXXXXXXXXX instead of the number I called which is not user friendly. I have to guess which number I would like to call again instead of just selecting the previous outgoing call and dial.
Is this something in FreePBX I could change?
Posts: 1
Participants: 1
@Socs28 wrote:
I'm sorry if this is answered elsewhere, but I didn't find it. I am wanting to upgrade to 14, but have an x86 13 system on the latest distro build now. I didn't like the look of using the "upgrade-tool" so I was thinking of setting up a VM and installing the 64-bit version of 13 on it, migrating my system to that so that I know everything is still working properly before I take down the current system. Then I'd upgrade the VM to the 14 version, then install the 14 version on my hardware and migrate back to that. What I am wondering about is my commercial modules and system activation. How would that work?
Thanks
Posts: 1
Participants: 1
@FreerPBXer wrote:
I don't know if this is an EPM Pro issue or an S500 issue, but across three sites we have "Dial First Digit" set to "Wake Up", not "Wake up and Dial", but in all cases it does the latter. Either EPM isn't configuring it correctly, or the phone isn't doing what it's being told to do.
Posts: 3
Participants: 2
@ptravel wrote:
Everything seemed to go fine. However:
I either get an error 16 when trying to send a fax, or it tries to dial for several minutes and then fails with an "unknown error" message.
When I try to run either either CDR or Call Event Logging, a get a completely empty log, i.e. no calls, even though many were made and received.
Everything worked fine under 13.
I'm not the most sophisticated FreePBX user, though I've been running my system for 3 years, now. Any help would be appreciated.
Posts: 2
Participants: 2
@fetoa wrote:
Hi again,
I wonder if it's possible to configure deffault options for quick create extensions. By deffault, all extensions are created with lo of options I don't need (FAX, etc.). Is there any file configuration for that?
Regards
Posts: 1
Participants: 1
@jangy wrote:
Hello,
I try to set email address in the voicemail configuration and email attachment but i don't recive the email message for new message.
Can you help me?Regards
Posts: 7
Participants: 4
@chasemixon wrote:
Is anyone else having issues installing ZULU click to call on the browser firefox? when I tried to install it today I get "This add-on has been disabled by an administrator." since I'm the administrator for our network, and don't remember disabling anything for zulu, I was wandering, if I had done this by mistake or maybe I have messed something?
Posts: 5
Participants: 2
@kr0490 wrote:
Anyone know of a good cheap or free Sip monitoring software (or even cheap hardware). I want to be able to easily search through calls and pull a sip ladder diagram for troubleshooting and learning (will be for my home lab). Anyone have any suggestiong?
Posts: 2
Participants: 2
@jasb wrote:
I have an inbound route, set to a group, that has external numbers ending with #.
Thing is, the call isn't placed when i call the inbound route, it only works if i call the ring group directly from an local extension.
Here's the call log and image on how the group is created:
Posts: 1
Participants: 1
@artsiom82 wrote:
hello
We need the INBOUND DID of the TRUNK available when a calls comes in on when a voicemail is emailed to a user. THis will be helpful especially because we have lots of inbound DIDs going to a dropbox and it would be nice to know which call came in from where without having to add PREPENDED data to the callerid for each one.did means ${from_did}
i found http://lists.digium.com/pipermail/asterisk-users/2007-August/194718.html
for me it will be
exten => *999,1,Set(CALLERID(name)=${FROM_DID})
but i don`t know where to put it
pls help
Posts: 1
Participants: 1
