@jessy5765 wrote:
Should I be able to access the web interface, ping, or SSH on a VLAN interface that is setup?
eth0.25 is working because the phones are communicating to the PBX on the VLAN but I cant access the web interface, SSH or ping the phone system. I can do all of that on eth0 just fine and I can access the web interface of all the phones on VLAN25 with no issues.
Posts: 4
Participants: 2
@jessy5765 wrote:
I am using the Chan SIP DDNS settings and my DDNS Client updates every 30 seconds. My fastest SIP Trunk re-registration on the new IP is taking 4 1/2 minutes. Is there a way to get freePBX to update even faster? I am looking to get my trunks to update with the new IP in less than a minute.
Posts: 2
Participants: 2
@dmanolis79 wrote:
I have a client that wants to integrate SuiteCRM with PBXact. Now I got suiteCRM and PBXact to log the calls. But the recording does not show up on the CRM side. I have told the module that I want the recordings on the PBX side. The Only thing that appears on the CRM side is call information but for the recording is just a circle that does nothing. The PBX is not on the same network as the CRM. Do I need to open any ports for the recording to show up.
Posts: 1
Participants: 1
@steve_pbuk wrote:
Hi
I have installed Zulu and set it up and it can connect to the PBX fine.
If I make a call from or two the zulu soft phone on I can not hear any audio at either end.
I have tested with all firewalls turned off but still no joy.
Anyone got any ideas?
(My normal desk phones work fine on the same network)
Posts: 4
Participants: 2
@hiastar_alex wrote:
Hello all:
Vega 200G gateway how to set echo cancellation?
Posts: 4
Participants: 3
@yohancz wrote:
My FreePBX generate unknown uploading traffic rapidly to varies IP located in china.
what can be the issue ?we have configured freepbx with Bitrix24 CRM using add-on
i have disabled the add-on and checked but traffic goes from the PBX.All IPs related to China Telecom
Posts: 1
Participants: 1
@FreerPBXer wrote:
While awaiting a number port, we have some numbers RCF’d to native TNs. I have a native with an inbound route to a custom extension that calls an external number.
When we call the native it goes through to the external cell as expected. When we call the number that is RCF’d to the native the calls comes in but is then dropped.
The same thing happens if the RCF’d number rings to an on-prem handset that is forwarded to an external number.
Would be great if we can find a fix for this. There is only one trunk and it’s a Comcast PRI running through a Digium G100.
Appreciate any insight/help.
Posts: 21
Participants: 3
@choiceit wrote:
Hello guys! I have a FreePBX v 13.0.192.19 at one office and v v14.0.1.24 at another office.
Setting up- a Virtual extension with FM/FM enabled with an outside phone number in the follow me list works in v 13, but does not work with an identical configuration in v 14.0.1.24.
Anyone know of recent bugs or some change that would prevent FM/FM from working on the newer server?
When running an SIP trace, I get this error when dialing the virtual extension:
[2018-01-29 12:14:36] WARNING[23859][C-0000033a]: pbx.c:4416 __ast_pbx_run: Channel ‘SIP/201-00001357’ sent to invalid extension but no invalid handler: context,exten,priority=ext-local,return,1
Scheduling destruction of SIP dialog ‘622edc4b-80c16ff9-9e009cba@10.25.1.120’ in 6400 ms (Method: INVITE)
Posts: 10
Participants: 4
@okynnor1 wrote:
Hi, Backups have been working perfectly until the most recent update in January 2018. Right now backups are automatically failing and the error message is below. If anyone can help me, I’d be grateful.
Creating backup…
Storing backup…
Whoops\Exception\ErrorException: unlink(/var/spool/asterisk/backup/MyBooks_Backup_Scheme/20171230-160001-1514678401-14.0.1.24-1982036839.tgz): No such file or directory in file /var/www/html/admin/modules/backup/functions.inc/class.backup.php on line 807
Stack trace:
- Whoops\Exception\ErrorException->() /var/www/html/admin/modules/backup/functions.inc/class.backup.php:807
- unlink() /var/www/html/admin/modules/backup/functions.inc/class.backup.php:807
- FreePBX\modules\Backup\Backup->maintenance() /var/www/html/admin/modules/backup/functions.inc/class.backup.php:381
- FreePBX\modules\Backup\Backup->store_backup() /var/www/html/admin/modules/backup/bin/backup.php:148
Posts: 1
Participants: 1
@perrcla wrote:
Hi,
I have an IVR. This IVR point to my extension (XXX).
XXX has unconditional transfer to my cell phone.When I answer with my cell phone, caller can use *2 to transfer call everywhere…
Disallow transfer features for inbound callers (in advanced settings) is set to NO.
is there a way to disable this “feature”?
I have this problem only with IVR and unconditional scenario.
edit: freepbx 10.13.66-22
Posts: 4
Participants: 2
@FN_GM wrote:
Hello,
I wonder if someone can help please? We are running the latest version of SNG7 on a PBX and for incoming external calls we are seeing multiple entries for the same call in the CDR records. We have call recording enabled and from the recordings I can 100% confirm that they are duplicates. This doesn’t happen for internal calls or outbound external calls. I can see 16 records for 1 call. Interestingly the call duration for all but one of the records is incorrect.
I have set the rule to record on the inbound and outbound routes.
I was wondering if anyone has any pointers please?
Thanks
Posts: 6
Participants: 3
@vinaykumar2040 wrote:
It is possible to integrate NEC SVC9300 pbx to freepbx for inbound\Outbound calls
Posts: 1
Participants: 1
@robfantini wrote:
It seems like those do close to the same thing.
currently Superfecta is not working correctly [ see bug reports].
our large asterisk phone book [ it contains all our customer and staff phone numbers ] is not used per cdr reports.Question.
is ‘caller id lookup sources’ used if ‘CID Superfecta’ is enabled?
Posts: 2
Participants: 1
@caiovernaglia wrote:
Hello to all…
I have a Freepbx system in our company and recently we added an IP Doorstation from Grandstream (GDS3710).
I succesfully added the doorstation to FreePBX and it’s working fine.This doorstation place a call to a group of phones and, who answers the call send DTMF’s tones to unlock our gate (right now it’s configured to unlock with #96*)
But our boss want’s to store, in a database, who send those tones.
The problem is, the database must be filled only when the DTMF command (#96*) is sent by who answered the call.Anyone has an idea how to do it?
Thanks!
Posts: 1
Participants: 1
@AndreL wrote:
Hi,
Some issue with this upgrade on FreePBX 14 :
core 14.0.5.11 (current: 14.0.5.9)
framework 14.0.1.36 (current: 14.0.1.31)
- Some feature codes like “In-Call Asterisk Disconnect Code” not in the list anymore
- typing ‘*’ hangup the call
many more call drops (but maybe not related)
After rollback to version 14.0.5.9 and 14.0.1.31 back to normal.
André.
Posts: 1
Participants: 1
@SamTaylor510 wrote:
After latest module upgrades firewall is no longer running. FreePBX 14.0.1.36. On the Dashbaord, Firewall has the red “X”. This system has been functional for 6 months with no problems. Under the firewall settings the only option is to disable firewall. Responsive firewall is enabled. Allowed networks and trusted networks are there. Correct interface is showing. Receive the following message when checking firewall status:
Firewall is not running! File:/var/www/html/admin/modules/firewall/Attacks.class.php:17
Posts: 1
Participants: 1
@tedybill wrote:
hello guys
i install e free PBX but the system ask me for a login
when i install the system ask me only for the password no for username
Posts: 1
Participants: 1
@tedybill wrote:
hello guys
i install e free PBX but the system ask me for a login
when i install the system ask me only for the password no for username
Posts: 2
Participants: 2
@FN_GM wrote:
Hello - I hope everyone is ok?
I was wondering if someone can help please?
Our outbound routes set the correct caller ID for each site. This works great when calling land lines and mobiles.
However when we call the emergency services, the correct Caller ID isn’t used and they see the default caller ID for our trunk.
Our SIP Trunk provider say this is due to the P-Asserted Identify Header no being set by the PBX.
I was wondering if anyone can assist with this please? Below are the settings on our Trunk.
Thanks for any help.
type=friend insecure=port,invite host=xxx.xxx.xxx.xxx dissallow=all context=from-trunk allow=ulaw
Posts: 1
Participants: 1
@probegtze wrote:
I’m having the same issue; in case you are interested, here is the output of crontab -l
[root@FreepbxV3 ~]# su asterisk bash-4.2$ crontab -l @daily [ -e /var/www/html/admin/modules/sysadmin/bin/check_portal.php ] && /var/www/html/admin/modules/sysadmin/bin/check_portal.php @daily [ -x /var/lib/asterisk/agi-bin/ddns_client.php ] && /var/lib/asterisk/agi-bin/ddns_client.php @monthly ID=freepbx_backup_1 /var/lib/asterisk/bin/backup.php --id=1 * 1 * * * /usr/sbin/fwconsole certificates updateall -q */1 * * * * /var/lib/asterisk/bin/pagepro-scheduler.php 2>&1 >/dev/null 0 0 1 * * php /var/lib/asterisk/agi-bin/backuprecordings.php 2>&1 >/dev/null @daily [ -x /var/lib/asterisk/bin/freepbx_sipstation_check ] && /var/lib/asterisk/bin/freepbx_sipstation_check 50 * * * * /var/lib/asterisk/bin/freepbx-cron-scheduler.php 26 * * * * /usr/sbin/fwconsole util cleanplaybackcache -q @daily /usr/sbin/fwconsole pms mk_dirty > /dev/null 2>&1 * * * * * /usr/sbin/fwconsole pms wu_alert > /dev/null 2>&1 * * * * * [ -x /var/www/html/admin/modules/dashboard/scheduler.php ] && /var/www/html/admin/modules/dashboard/scheduler.php > /dev/null 2>&1 */1 * * * * /usr/sbin/fwconsole calendar --sync 2>&1 > /dev/null */15 * * * * /usr/sbin/fwconsole userman --syncall -q @hourly [ -x /var/lib/asterisk/bin/storage.php ] && /var/lib/asterisk/bin/storage.php */5 * * * * [ -e /var/www/html/admin/modules/qxact_reports/import_queue_data.php ] && php /var/www/html/admin/modules/qxact_reports/import_q ueue_data.php @daily [ -x /var/lib/asterisk/agi-bin/update_license.php ] && /var/lib/asterisk/agi-bin/update_license.php --delay * * * * * [ -x /var/lib/asterisk/bin/schedtc.php ] && /var/lib/asterisk/bin/schedtc.php bash-4.2$I have tried blindly to run ‘yum install php-mbstring’, with no success:
root@FreepbxV3 ~]# yum install php-mbstring Loaded plugins: fastestmirror, versionlock Loading mirror speeds from cached hostfile Resolving Dependencies --> Running transaction check ---> Package php-mbstring.x86_64 0:5.4.16-43.el7_4 will be installed --> Processing Dependency: php-common(x86-64) = 5.4.16-43.el7_4 for package: php-mbstring-5.4.16-43.el7_4.x86_64 --> Running transaction check ---> Package php-common.x86_64 0:5.4.16-43.el7_4 will be installed --> Processing Dependency: libzip.so.2()(64bit) for package: php-common-5.4.16-43.el7_4.x86_64 --> Running transaction check ---> Package libzip.x86_64 0:0.10.1-8.el7 will be installed --> Processing Conflict: php56w-common-5.6.33-1.sng7.x86_64 conflicts php-common < 5.6 --> Finished Dependency Resolution Error: php56w-common conflicts with php-common-5.4.16-43.el7_4.x86_64 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigestAlso, the “FEEDS” box is gone. It was there, I changed tab, and when I returned: it was gone.
Any suggestion would be greatly appreciated!
Thanks
Frank
Posts: 2
Participants: 2