@hjbtyvv wrote:

Hi,
When I try to access the dashboard by typing http://192.168.0.196
I get a white screen with this on it:

0 System Admin 14.0.20 Copyright 2018 by Sangoma Technologies Inc., All rights reserved By installing, copying, downloading, distributing, inspecting or using the materials provided herewith, you agree to all of the terms of use as outlined in our End User Agreement which can be found and reviewed at https://www.freepbx.org/legal/

Any ideas?

Posts: 1

Participants: 1

Read full topic

@ChadRT wrote:

I have 5 numbers all with the same provider Twilio

I have 5 inbound routes all identical in nature with the exception of the DID corresponding to each of the 5 from Twilio.

The toll Free number gets a message that it is disconnected (Allison Smith Voice) the other 4 numbers ring thru just fine, we can make and receive calls over the trunk without any hiccup.

Asterisk shows this:
Connected to Asterisk 14.7.5 currently running on freepbx (pid = 2313)
== Setting global variable ‘SIPDOMAIN’ to ‘96...***’
– Executing [+18005551212@from-sip-external:1] NoOp(“PJSIP/anonymous-00004bfc”, “Received incoming SIP connection from unknown peer to +18005551212”) in new stack
– Executing [+18005551212@from-sip-external:2] Set(“PJSIP/anonymous-00004bfc”, “DID=+18005551212”) in new stack
– Executing [+18005551212@from-sip-external:3] Goto(“PJSIP/anonymous-00004bfc”, “s,1”) in new stack
– Goto (from-sip-external,s,1)
– Executing [s@from-sip-external:1] GotoIf(“PJSIP/anonymous-00004bfc”, “1?setlanguage:checkanon”) in new stack
– Goto (from-sip-external,s,2)
– Executing [s@from-sip-external:2] Set(“PJSIP/anonymous-00004bfc”, “CHANNEL(language)=en”) in new stack
– Executing [s@from-sip-external:3] GotoIf(“PJSIP/anonymous-00004bfc”, “1?noanonymous”) in new stack
– Goto (from-sip-external,s,5)
– Executing [s@from-sip-external:5] Set(“PJSIP/anonymous-00004bfc”, “TIMEOUT(absolute)=15”) in new stack
– Channel will hangup at 2018-10-25 08:51:11.398 PDT.
[2018-10-25 08:50:56] WARNING[21865][C-00001663]: func_channel.c:470 func_channel_read: Unknown or unavailable item requested: ‘recvip’
– Executing [s@from-sip-external:6] Log(“PJSIP/anonymous-00004bfc”, "WARNING,"Rejecting unknown SIP connection from “”) in new stack
[2018-10-25 08:50:56] WARNING[21865][C-00001663]: Ext. s:6 @ from-sip-external: "Rejecting unknown SIP connection from "
– Executing [s@from-sip-external:7] Answer(“PJSIP/anonymous-00004bfc”, “”) in new stack
> 0x7feaecde7190 – Strict RTP learning after remote address set to: 54.244.51.28:14428
> 0x7feaecde7190 – Strict RTP switching to RTP target address 54.244.51.28:14428 as source
– Executing [s@from-sip-external:8] Wait(“PJSIP/anonymous-00004bfc”, “2”) in new stack
> 0x7feaecde7190 – Strict RTP learning complete - Locking on source address 54.244.51.28:14428
– Executing [s@from-sip-external:9] Playback(“PJSIP/anonymous-00004bfc”, “ss-noservice”) in new stack
– <PJSIP/anonymous-00004bfc> Playing ‘ss-noservice.ulaw’ (language ‘en’)
– Executing [h@from-sip-external:1] Hangup(“PJSIP/anonymous-00004bfc”, “”) in new stack
== Spawn extension (from-sip-external, h, 1) exited non-zero on ‘PJSIP/anonymous-00004bfc’

So with all of that I am at a loss, I have tried everything I know to fix the issue. Our toll free gets used a lot and the previous IT has taken all the steps necessary to open the firewall to Twilio’s IPs and Ports as I have double verified them. And I am leaning towards this being my problem and theirs but I need to know for sure.

12.7.5-1807-1.sng7
FreePBX 14.0.3.19
Asterisk 14.7.5

Posts: 2

Participants: 2

Read full topic

@hjbtyvv wrote:

When I bring up the Dashboard, I get the following critical Error:

Failed to send security notification email. An attempt to send an email to “” with security notifications failed.

Any ideas? There does not seem to be a similar case in the community wiki that I can see. This is a fresh install on a Raspberry Pi from http://www.raspberry-asterisk.org/ . The only things I have done besides loading the new system are to set an admin user, password, and email, and to update and reload all the modules.

Posts: 3

Participants: 2

Read full topic

@mixhali wrote:

Hi Guys, Trying to install G729 codec on asterisk 14.03.13 when I execut the load module command I et this error

MBICPBX01*CLI> module load codec_g729a.so
Unable to load module codec_g729a.so
Command ‘module load codec_g729a.so’ failed.
[2018-10-26 06:24:23] WARNING[4767]: loader.c:583 load_dlopen: Error loading module ‘codec_g729a.so’: /usr/lib64/asterisk/modules/codec_g729a.so: undefined symbol: __ast_cli_register_multiple
[2018-10-26 06:24:23] WARNING[4767]: loader.c:1182 load_resource: Module ‘codec_g729a.so’ could not be loaded.

Any hints?

Posts: 1

Participants: 1

Read full topic

@luckman212 wrote:

Sorry for this dumb question but how the heck do I change my password here on the FreePBX community forum? I clicked around everywhere- don’t see it.

Posts: 2

Participants: 2

Read full topic

@hjbtyvv wrote:

I am trying to figure out how to provision my Yealink phones on my Raspi, which does not support EndPoint Manager. I have read https://wiki.asterisk.org/wiki/display/AST/Phone+Provisioning%2C+Putting+it+all+together.

However, when I type

http show status

The result is that the http command is not found. Any ideas?

Posts: 12

Participants: 3

Read full topic

@admin1520 wrote:

[2018-10-26 10:21:26] ERROR[2276]: chan_sip.c:4263 __sip_reliable_xmit: Serious Network Trouble; __sip_xmit returns error for pkt data
Reliably Transmitting (no NAT) to 77.72.169.128:5060:
OPTIONS sip:77.72.169.128 SIP/2.0
Via: SIP/2.0/UDP 192.168.2.134:5060;branch=z9hG4bK333f536a
Max-Forwards: 70
From: “asterisk” sip:asterisk@192.168.2.134;tag=as683c8a7c
To: sip:77.72.169.128
Contact: sip:asterisk@192.168.2.134:5060
Call-ID: 2c40d3644ce0bfae48f4babc42a0b23d@192.168.2.134:5060
CSeq: 102 OPTIONS
User-Agent: Asterisk PBX 13.12.1
Date: Fri, 26 Oct 2018 14:21:26 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Content-Length: 0

Posts: 2

Participants: 2

Read full topic

@sentinelace wrote:

When I try to run a full backup on freepbx 13 I get the following. How do I fix this?

mysqldump: Error 1194: Table ‘cel’ is marked as crashed and should be repaired when dumping table cel at row: 884573

Posts: 3

Participants: 3

Read full topic

@ttquattroman wrote:

Hi everyone,

Does anyone have any experience in using a Grandstream HT813 as their ATA FXO PSTN (plain old POTS) interconnect with FreePBX.

I am currently using a Cisco SPA3102 with poor audio results (echo and clipping).

Thanks

Peter

Posts: 1

Participants: 1

Read full topic

@bluehive wrote:

We have 3 divisions and 1 employee needs to be able to have outbound CID appear correct depending on which division they calling out as.

So we’ll say extension 201 needs to be able to call out at
555-111-1111
555-111-2222
555-111-3333

Each DID has a separate trunk and inbound route (because if you call 555-111-1111, you get one IVR and you get other ones for the other 2 DIDs). Each DID also has its own Outbound route.

I’ve tried setting up in the dial plan for each of the DIDs to use a prefix of 8,7,6 respectively so that when the guy at extension 201 dials out and wants to have CID appear as division 1 which is 555-111-1111, he has to dial 815556667777 That should connect his call to 555-666-7777 and his CID should show up as 555-111-1111

If he dialed 715556667777 That should connect his call to 555-666-7777 and his CID should show up as 555-111-2222

However whenever he calls out from his extension using the prefix of 8 or 7 or 6 the phone just says “Your call can not be completed as dialed. Please check the number and dial again”.

I am sure I have messed up something in the outbound dial plan, but I am not sure.

Posts: 2

Participants: 2

Read full topic

@TechGuyMike wrote:

I know that I can use Inbound Routes to direct calls by DID. What I’d like to do is have several DIDs point to a Time Condition first and then go to different extensions based on the DID. Is that possible without creating a new Time Condition (and override) for each DID? Thanks!

Posts: 1

Participants: 1

Read full topic

@AC_Jay wrote:

Any idea why I might be getting this message?

image.png765x79 5.44 KB

I don’t see any specific errors on either side and, as far as I can tell, communication between FreePBX and my gateway is working fine (I can reboot the gateway from FreePBX).

Thoughts?

Thanks in advance.

Posts: 1

Participants: 1

Read full topic

@mhetterm wrote:

I am getting a “Maximum execution time of 30 seconds exceeded” on “/var/ww/html/admin/modules/ucp/htdocs/vendor/tedivm/jshrink/src/JShrink/Minifier.php:540” when loading the UCP login page. Unfortunately, the Username/password and cloud/spinning gear icon are modal on top of the whoops page!

Edit:

On latest edge versions:

Framework 14.0.4.5
Core 14.0.18.41
UCP 14.0.3.1
On distro 12.7.5-1807-1.sng7

Trying to paste screenshot here:

UCP Whoops.png1920x1040 64.5 KB

Posts: 5

Participants: 2

Read full topic

@kolhell wrote:

When trying to enable this option I receive an “Enabling notifications was denied” toast. Unfortunately I was unable to find information about this specific issue or what exactly is denying me.

I am on Chrome, on Linux, and I have our FreePBX server on the allowed list for notifications.

Chrome notifications through other sites work without issue.

I have admin access to the FreePBX instance, if a setting in the admin controls needs to be changed.

Specifically I’m looking for a notification to pop when somebody calls, particularly when I have my headphones in, so if anybody has a suggestion of a lightweight solution for this I would be very happy with that. I’ve looked at some other 3rd party software to do this, but they all seems to either be way more than I need (I don’t need to make or receive calls, even, just get a notification) or they handle notifications through a webpage (I specifically am looking for a notification popup, not a new page opening or a page redirect).

Thanks

Posts: 2

Participants: 2

Read full topic

@rymes wrote:

I figured that I would find a thread on this topic, but was unable. I am running FreePBX 10.13.66-22, and I would like to accomplish two things:

1.) Add additional disk capacity.
2.) Upgrade to the most recent SNG7 distro version.

To this end, I would like to copy all of the existing data to the new disk, keep the old disk as a backup, then upgrade the system now running on the new disk. If anything goes wrong with the upgrade, I can just boot off of the old disks and be back in business.

Normally I would power the system down and use an imaging tool like Acronis to copy the old disk to the new disk, but I thought to myself “Wasn’t LVM supposed to make this easier?” For this reason, I thought I would ask if folks here have thoughts on how best to do this.

Presumedly, if I use an imaging program to copy the existing partitions to a larger disk, I can then use the LVM tools to make the existing LVs larger?

Many thanks,

Tom

Posts: 1

Participants: 1

Read full topic

@mwilliams0156 wrote:

Curious if anyone here was familiar with the vb net API for the DIVA… I obtained one second hand so I don’t have any support capabilities without the pay per incident thing and I don’t really see any general communities for the divaAPI…

I am simply working on trying to get the included sound card provider that they have in the SDK to work correctly under windows 7 32 bit with visual studio/vb.net 2017… I’ve taken their “simplephone” app and stripped it down to the bare minimums of making a call and I’m not hearing a thing…

Thanks for any help any of you might provide…

Posts: 1

Participants: 1

Read full topic

@ABBA wrote:

Go to “Asterisk SIP setting” , only find " other sip setting" in chan SIP setting and add below two lines

accept_outofcall_message=yes
outofcall_message_context=astsms

but still doesn’t work on all pjsip extensions all my extensions are pjsip, but didn’t find " other sip setting" in pjsip setting. Freepbx doesn’t support sip messaging for pjsip?

Posts: 1

Participants: 1

Read full topic

@fropa wrote:

Hi, I use FreePBX 13 version with asterisk 13. I noticed that once in a minute there is a CPU load. Then I checked “/var/spool/cron/asterisk” rules and detected that there is one line :

“* * * * * [ -x /var/lib/asterisk/bin/schedtc.php ] && /var/lib/asterisk/bin/schedtc.php”

That file isn’t commented so I can’t understand what this script actually does. I’m interested in if I change ‘once in a minute’ rule to ‘once in an hour’ what can occur to system performance? I need to know what that file is for.

Posts: 2

Participants: 2

Read full topic

@colin911 wrote:

Hello,

I had a new Virtual Server running Freepbx properly with a GOIP 8 device to manage phone calls by sim. Randomly and after a few days incoming and outgoing calls for the trunk through that GOIP device stopped working. Rebooting the GOIP device had no effect, but rebooting the FreePBX box fixed everything. Both the GOIP and FreePBX showed as registered.

I figured it was my Virtual setup that seemed to disrupt the network connection or something. So I bought box from sangoma for it to run on. I still have the same problem.

Each time it has happened I was not available to pull log files from when the issue happened. This time I did and at least the errors are below.

The sections where you just get this line, the system is working fine: [2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.

The section in the middle is where things were not working fine. During that time I rebooted the GOIP machine and enabled and disabled a few times the Trunk to see if that would reconnect it.

Appreciate any suggestions.

[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:53] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:54] ERROR[16649][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16652][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16653][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16653][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16653][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16653][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:49:55] ERROR[16654][C-000001a8] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 14:59:26] ERROR[19664] config_options.c: Unable to load config file ‘acl.conf’
[2018-11-01 14:59:27] ERROR[19664] res_sorcery_config.c: Unable to load config file ‘pjproject.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90158-identify’ is not configured to match anything.
[2018-11-01 14:59:27] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90158-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90160-identify’ is not configured to match anything.
[2018-11-01 14:59:27] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90160-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90159-identify’ is not configured to match anything.
[2018-11-01 14:59:27] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90159-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90152-identify’ is not configured to match anything.
[2018-11-01 14:59:27] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90152-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 14:59:27] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 14:59:27] ERROR[19664] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 14:59:27] ERROR[19664] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:00:14] ERROR[20302] config_options.c: Unable to load config file ‘acl.conf’
[2018-11-01 15:00:15] ERROR[20302] res_sorcery_config.c: Unable to load config file ‘pjproject.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90158-identify’ is not configured to match anything.
[2018-11-01 15:00:15] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90158-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90160-identify’ is not configured to match anything.
[2018-11-01 15:00:15] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90160-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90159-identify’ is not configured to match anything.
[2018-11-01 15:00:15] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90159-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_endpoint_identifier_ip.c: Identify ‘90152-identify’ is not configured to match anything.
[2018-11-01 15:00:15] ERROR[19667] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90152-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:00:15] ERROR[19667] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:00:15] ERROR[20302] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:00:15] ERROR[20302] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:24] ERROR[21412] config_options.c: Unable to load config file ‘acl.conf’
[2018-11-01 15:04:25] ERROR[21412] res_sorcery_config.c: Unable to load config file ‘pjproject.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90158-identify’ is not configured to match anything.
[2018-11-01 15:04:25] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90158-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90160-identify’ is not configured to match anything.
[2018-11-01 15:04:25] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90160-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90159-identify’ is not configured to match anything.
[2018-11-01 15:04:25] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90159-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90152-identify’ is not configured to match anything.
[2018-11-01 15:04:25] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90152-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:25] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:25] ERROR[21412] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:25] ERROR[21412] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:51] ERROR[21879] config_options.c: Unable to load config file ‘acl.conf’
[2018-11-01 15:04:51] ERROR[21879] res_sorcery_config.c: Unable to load config file ‘pjproject.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90158-identify’ is not configured to match anything.
[2018-11-01 15:04:51] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90158-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90160-identify’ is not configured to match anything.
[2018-11-01 15:04:51] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90160-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90159-identify’ is not configured to match anything.
[2018-11-01 15:04:51] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90159-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_endpoint_identifier_ip.c: Identify ‘90152-identify’ is not configured to match anything.
[2018-11-01 15:04:51] ERROR[21414] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90152-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:51] ERROR[21414] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:51] ERROR[21879] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:04:51] ERROR[21879] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:07:00] ERROR[23005] astobj2_container.c: Iterator container is not valid.
[2018-11-01 15:07:00] ERROR[23005] astobj2.c: FRACK!, Failed assertion user_data is NULL (0)
[2018-11-01 15:08:31] ERROR[2045] config_options.c: Unable to load config file ‘acl.conf’
[2018-11-01 15:08:31] ERROR[2045] config_options.c: Unable to load config file ‘statsd.conf’
[2018-11-01 15:08:31] ERROR[2045] res_sorcery_config.c: Unable to load config file ‘codecs.conf’
[2018-11-01 15:08:31] ERROR[2045] res_sorcery_config.c: Unable to load config file ‘pjproject.conf’
[2018-11-01 15:08:31] ERROR[2045] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:08:31] ERROR[2045] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:08:31] ERROR[2045] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:08:32] ERROR[2045] config_options.c: Unable to load config file ‘hep.conf’
[2018-11-01 15:08:32] ERROR[2045] res_calendar.c: Unable to load config calendar.conf
[2018-11-01 15:08:32] ERROR[2045] pbx_lua.c: Error loading extensions.lua: cannot open ‘/etc/asterisk/extensions.lua’ for reading: No such file or directory
[2018-11-01 15:08:32] ERROR[2045] res_config_sqlite.c: Unable to load res_config_sqlite.conf
[2018-11-01 15:08:32] ERROR[2045] res_pjsip_endpoint_identifier_ip.c: Identify ‘90158-identify’ is not configured to match anything.
[2018-11-01 15:08:32] ERROR[2045] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90158-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:08:32] ERROR[2045] res_pjsip_endpoint_identifier_ip.c: Identify ‘90160-identify’ is not configured to match anything.
[2018-11-01 15:08:32] ERROR[2045] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90160-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:08:32] ERROR[2045] res_pjsip_endpoint_identifier_ip.c: Identify ‘90159-identify’ is not configured to match anything.
[2018-11-01 15:08:32] ERROR[2045] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90159-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:08:32] ERROR[2045] res_pjsip_endpoint_identifier_ip.c: Identify ‘90152-identify’ is not configured to match anything.
[2018-11-01 15:08:32] ERROR[2045] res_sorcery_config.c: Could not create an object of type ‘identify’ with id ‘90152-identify’ from configuration file ‘pjsip.conf’
[2018-11-01 15:08:32] ERROR[2045] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:08:32] ERROR[2045] chan_dahdi.c: Unable to load config chan_dahdi.conf
[2018-11-01 15:08:32] ERROR[2045] chan_ooh323.c: Can’t load ooh323 config file, OOH323 Disabled
[2018-11-01 15:08:32] ERROR[2045] chan_mobile.c: No Bluetooth devices found. Not loading module.
[2018-11-01 15:08:32] ERROR[2045] res_pjsip_config_wizard.c: Unable to load config file ‘pjsip_wizard.conf’
[2018-11-01 15:08:32] ERROR[2045] config_options.c: Unable to load config file ‘agents.conf’
[2018-11-01 15:08:32] ERROR[2045] app_agent_pool.c: Unable to load config. Not loading module.
[2018-11-01 15:08:32] ERROR[2045] cdr_syslog.c: Unable to load cdr_syslog.conf. Not logging custom CSV CDRs to syslog.
[2018-11-01 15:08:32] ERROR[2045] chan_phone.c: Unable to load config phone.conf
[2018-11-01 15:08:32] ERROR[2045] chan_unistim.c: Unable to load config unistim.conf
[2018-11-01 15:08:33] ERROR[2045] pbx_dundi.c: Unable to load config dundi.conf
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3700][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3701][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3698][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3698][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.
[2018-11-01 15:09:28] ERROR[3698][C-00000000] res_pjsip_header_funcs.c: This function requires a PJSIP channel.

Posts: 1

Participants: 1

Read full topic

@chambers wrote:

below is the output from asterisks - rvvvv, inbound calls are going through but not outbound, please help

– Executing [097992016@from-internal:1] Macro(“SIP/2002-00005dbd”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/2002-00005dbd”, “TOUCH_MONITOR=1541069442.39956”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/2002-00005dbd”, “AMPUSER=2002”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/2002-00005dbd”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/2002-00005dbd”, “1?Set(REALCALLERIDNUM=2002)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/2002-00005dbd”, “AMPUSER=2002”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/2002-00005dbd”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/2002-00005dbd”, “AMPUSERCIDNAME=Kitwe Sales2”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/2002-00005dbd”, “0?report”) in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/2002-00005dbd”, “AMPUSERCID=2002”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/2002-00005dbd”, “__DIAL_OPTIONS=”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/2002-00005dbd”, “CALLERID(all)=“Kitwe Sales2” <2002>”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/2002-00005dbd”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:13] ExecIf(“SIP/2002-00005dbd”, “1?Set(GROUP(concurrency_limit)=2002)”) in new stack
– Executing [s@macro-user-callerid:14] ExecIf(“SIP/2002-00005dbd”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:15] GotoIf(“SIP/2002-00005dbd”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,29)
– Executing [s@macro-user-callerid:29] Set(“SIP/2002-00005dbd”, “CALLERID(number)=2002”) in new stack
– Executing [s@macro-user-callerid:30] Set(“SIP/2002-00005dbd”, “CALLERID(name)=Kitwe Sales2”) in new stack
– Executing [s@macro-user-callerid:31] Set(“SIP/2002-00005dbd”, “CDR(cnum)=2002”) in new stack
– Executing [s@macro-user-callerid:32] Set(“SIP/2002-00005dbd”, “CDR(cnam)=Kitwe Sales2”) in new stack
– Executing [s@macro-user-callerid:33] Set(“SIP/2002-00005dbd”, “CHANNEL(language)=en”) in new stack
– Executing [097992016@from-internal:2] NoCDR(“SIP/2002-00005dbd”, “”) in new stack
– Executing [097992016@from-internal:3] Progress(“SIP/2002-00005dbd”, “”) in new stack
– Executing [097992016@from-internal:4] Wait(“SIP/2002-00005dbd”, “1”) in new stack
– SIP/17001-00005dbc is ringing
– Executing [097992016@from-internal:5] Progress(“SIP/2002-00005dbd”, “”) in new stack
– Executing [097992016@from-internal:6] Playback(“SIP/2002-00005dbd”, “silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer”) in new stack
– <SIP/2002-00005dbd> Playing ‘silence/1.ulaw’ (language ‘en’)
– <SIP/2002-00005dbd> Playing ‘cannot-complete-as-dialed.gsm’ (language ‘en’)
[2018-11-01 12:50:45] NOTICE[2936]: chan_sip.c:29729 sip_poke_noanswer: Peer ‘15001’ is now UNREACHABLE! Last qualify: 29
– <SIP/2002-00005dbd> Playing ‘check-number-dial-again.gsm’ (language ‘en’)
– Executing [097992016@from-internal:7] Wait(“SIP/2002-00005dbd”, “1”) in new stack
– Executing [097992016@from-internal:8] Congestion(“SIP/2002-00005dbd”, “20”) in new stack
[2018-11-01 12:50:50] WARNING[7919][C-0000259d]: channel.c:4862 ast_prod: Prodding channel ‘SIP/2002-00005dbd’ failed
== Spawn extension (from-internal, 097992016, 8) exited non-zero on ‘SIP/2002-00005dbd’
– Executing [h@from-internal:1] Hangup(“SIP/2002-00005dbd”, “”) in new stack

Posts: 4

Participants: 2

Read full topic